Salt systems create some of the best quality swimming water available, but there are a few simple steps that can be performed to increase the water quality even more and get the most out of your investment!
Salt Water Magic made by Natural Chemistry has many benefits for water quality and prolonging the life of your chlorine generator cell. Salt Water Magic is an easy to use monthly application that takes very little time applying to your pool.
Salt Water Magic Monthly Kit BENEFITS OF THE SALT WATER SYSTEM:
- Pool Salt - pure quick dissolve swimming pool salt,
contains no stain causing water softener additives
- Metal Deactivator - chelants and scale inhibitors protect pool surfaces from metal staining
and prolong the life of the generator and electrolytic cell
Normal sanitizer levels will prevent algae growth, guaranteed.
NEAR ZERO PHOSPHATE LEVELS INCREASE EFFICIENCY OF THE GENERATOR!
- Pool Water Conditioner - protects pool water against sunlight UV loss
- Stabilizer - provides stable water balance, protects pool equipment,
enhances swimmer comfort
- Natural Enzymes - reduce organic build-up in water, on pool surfaces,
filter and generator cells, minimizing maintenance and scrubbing
...SOFT, SILKY WATER!
Salt Water Magic products contain revolutionary technology, specifically engineered for pools using chlorine generators. This easy to use multi-mineral system simplifies start-up and allows your generator to work as designed. By providing the perfect pool water environment continually, your generator works less and also more efficiently. The result is longer generator life and the highest water quality possible. Natural Chemistry takes the guesswork out of pool maintenance. Nothing better, nothing easier - guaranteed.
Monthly Maintenance Kit Includes:
1 x 5.5lb bag of Salt Water Magic Salt/Mineral Mix
1 x 1L bottle of Salt Water Magic for Organic and
Phosphate Removal
Although most chlorine generators are self cleaning, sometimes they will require a manually cleaning to remove calcium build up and debris that has passed the filter and accumulated on the cells internals. Performance recommends that the cell be checked once per season and clean as necessary. Cleaning of the cell can be reduced by proper water chemistry.
Jandy Aqua Pure Cleaning Instructions
Electrolytic Cell Cleaning – Once per year or as needed.
Acid Wash Cleaning.
1. Use a high pressure jet of water from a garden hose. If the cell cannot be reasonably cleaned in this manner, acid cleaning is necessary.
2. Remove the cell from the plumbing. Replace the cell with the spool piece, if necessary. Remove the sensor from the port.
3. To acid clean the cell, plug the two adjacent ports. Mix one pint of muriatic acid with two quarts of tap water in a plastic bucket.
4. Pour the acid/water mixture inside the cell. A foaming action will begin, which is caused by scale (calcium carbonate) being dissolved from the plates. If rigorous foaming action does not begin, the cell does not need to be cleaned (STOP THE CLEANING PROCESS- go on to next step “e”). Otherwise, allow the cell to remain in the solution until the foaming has stopped. However, do not leave in acid for more than 1/2 hour. *(Excessive Acid Washing will damage Electrolytic Cell).
5. Rinse the cell thoroughly with clean tap water and inspect. If deposits are still visible, repeat the cleaning procedure. Additional acid may need to be added to the solution.
6. Rinse the cell again with clean tap water and inspect. If clean, replace the cell and resume normal operation.
7. If the acid wash procedure is necessary, it is recommended that a sample of pool water be analyzed by an authorized Aqua Pure service representative for excessive hardness and/or improper water balance.
8. If no scale or debris deposits are observed in the cell after two bimonthly inspections, it is not necessary to continue bimonthly inspections. However, due to possible changes in pool water chemistry and filtering effectiveness, it is recommended that the cell be removed for inspection at least twice a year.
Flow/Temp/Salinity Sensor Cleaning
One time per year or as needed. It is rare but scale formations on the Flow/Temp/Salinity Sensor sometimes occur and will affect the accuracy of the salinity test.
1. Remove Flow/Temp/Salinity Sensor from the threaded PVC Tee or 3-Port Cell by turning counterclockwise or removing the union nut.
2. Brush with a mildly abrasive green fiber household cleaning pad. Contacts should be clean and bright.
WARNING Inhalation of muriatic acid vapor or contact with skin or eyes can cause serious injury or death. Wear goggles and rubber gloves, and perform cleaning in a well-ventilated area. Add acid to the water; do not add water to the acid as splashing could result.
3. Thoroughly rinse the Flow/Temp/Salinity Sensor with clean tap water. Replace and resume normal operation.
4. Turn power off and back on in order to recalibrate and reset Flow/Temp/Salinity Sensor. Reset anytime Flow/Temp/Salinity Sensor is unplugged.
We appreciate your interest in Performance Pool and Spa
If you have any questions on these services please call (651) 773 - 5883 or e-mail us.
Performance Pool and Spa
